/**
  @page FLASH_Program FLASH Program example
  
  @verbatim
  ******************** (C) COPYRIGHT 2015 STMicroelectronics *******************
  * @file    FLASH/FLASH_Program/readme.txt 
  * @author  MCD Application Team
  * @version V1.1.3
  * @date    15-December-2021
  * @brief   FLASH Program Example Description.
  ******************************************************************************
  *
  * Copyright (c) 2015 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
   @endverbatim

@par Example Description 

This example provides a description of how to program the STM32F30x FLASH.

After Reset, the Flash memory Program/Erase Controller is locked. To unlock it,
the FLASH_Unlock function is used.
Before programming the desired addresses, an erase operation is performed using 
the flash erase page feature. The erase procedure starts with the calculation of
the number of pages to be used. Then all these pages will be erased one by one by
calling FLASH_ErasePage function. 

Once this operation is finished, the programming operation will be performed by 
using the FLASH_ProgramWord function. The written data is then checked and the
result of the programming operation is stored into the MemoryProgramStatus variable.
 
@par Directory contents 

  - FLASH/FLASH_Program/stm32f30x_conf.h    Library Configuration file
  - FLASH/FLASH_Program/stm32f30x_it.c      Interrupt handlers
  - FLASH/FLASH_Program/stm32f30x_it.h      Interrupt handlers header file
  - FLASH/FLASH_Program/main.c              Main program
  - FLASH/FLASH_Program/system_stm32f30x.c  STM32F30x system source file
  
@note The "system_stm32f30x.c" is generated by an automatic clock configuration 
      system and can be easily customized to your own configuration. 
      To select different clock setup, use the "STM32F30x_Clock_Configuration_V1.0.0.xls" 
      provided with the AN4152 package available on <a href="http://www.st.com/internet/mcu/family/141.jsp">  ST Microcontrollers </a>
      
@par Hardware and Software environment

  - This example runs on STM32F303xC and STM32F303xE Devices.
  
  - This example has been tested with STMicroelectronics STM32303C-EVAL (STM32F30x)
    evaluation board and can be easily tailored to any other supported device 
    and development board.

@par How to use it ? 

In order to make the program work, you must do the following :
 - Copy all source files from this example folder to the template folder under
   Projects\STM32F30x_StdPeriph_Templates
 - Open your preferred toolchain 
 - Rebuild all files and load your image into target memory
 - Run the example

   

 */
