| Enumerator |
|---|
| XSECURE_SHA_INIT_ERROR |
0x02 - Error when SHA init fails.
|
| XSECURE_SHA_LAST_UPDATE_ERROR |
0x03 - Error when SHA last update fails.
|
| XSECURE_SHA_PMC_DMA_UPDATE_ERROR |
0x04 - Error when DMA driver fails to update the data to SHA
|
| XSECURE_SHA_TIMEOUT_ERROR |
0x05 - Error when timeout
|
| XSECURE_SHA_KAT_FAILED_ERROR |
0x06 - Error when SHA hash not matched with expected hash
|
| XSECURE_SHA_FINISH_ERROR |
0x07 - Error when SHA finish fails
|
| XSECURE_SHA_INVALID_PARAM |
0x08 - Invalid Argument
|
| XSECURE_SSS_INVALID_PARAM |
0x09 - Invalid Argument
|
| XSECURE_SHA_STATE_MISMATCH_ERROR |
0x0A - State mismatch
|
| XSECURE_SHA384_INVALID_PARAM |
0x0B - Invalid Param for SHA384 digest calculation
|
| XSECURE_SHA384_KAT_ERROR |
0x0C - Error when SHA384 KAT fails
|
| XSECURE_AES_GCM_TAG_MISMATCH |
0x40 - user provided GCM tag does not match calculated tag
|
| XSECURE_AES_KEY_CLEAR_ERROR |
0x41 - AES key clear error
|
| XSECURE_AES_DPA_CM_NOT_SUPPORTED |
0x42 - AES DPA CM is not supported on device
|
| XSECURE_AES_INVALID_PARAM |
0x43 - Invalid Argument
|
| XSECURE_AES_STATE_MISMATCH_ERROR |
0x44 - State mismatch
|
| XSECURE_AES_DEVICE_KEY_NOT_ALLOWED |
0x45 - Access to device keys is not allowed for IPI for any operations
|
| XSECURE_AES_ZERO_PUF_KEY_NOT_ALLOWED |
0x46 - Error when PUF Key is selected as key source and PUF key is zeroized
|
| XSECURE_AES_UNALIGNED_SIZE_ERROR |
0x47 - Error when data is unaligned
|
| XSECURE_AES_INVALID_MODE |
0x48 - Error when invalid mode is used for AES operation
|
| XSECURE_AES_KAT_DATA_MISMATCH_ERROR |
0x46 - Error when AES data not matched with expected data
|
| XSECURE_AES_KAT_FAILED_ERROR |
0x47 - AES KAT fails
|
| XSECURE_AESDPACM_KAT_WRITE_KEY_FAILED_ERROR |
0x48 - Error when AESDPACM key write fails.
|
| XSECURE_AESDPACM_KAT_KEYLOAD_FAILED_ERROR |
0x49 - Error when AESDPACM key load fails.
|
| XSECURE_AESDPACM_SSS_CFG_FAILED_ERROR |
0x4A - Error when AESDPACM sss config fails
|
| XSECURE_AESDPACM_KAT_FAILED_ERROR |
0x4B - Error when AESDPACM KAT failed
|
| XSECURE_AESKAT_INVALID_PARAM |
0x4C - Invalid Argument
|
| XSECURE_SHA3_INIT_ERROR |
0x02 - Error when SHA3 init fails.
|
| XSECURE_SHA3_LAST_UPDATE_ERROR |
0x03 - Error when SHA3 last update fails.
|
| XSECURE_SHA3_PMC_DMA_UPDATE_ERROR |
0x04 - Error when DMA driver fails to update the data to SHA3
|
| XSECURE_SHA3_TIMEOUT_ERROR |
0x05 - Error when timeout
|
| XSECURE_SHA3_KAT_FAILED_ERROR |
0x06 - Error when SHA3 hash not matched with expected hash
|
| XSECURE_SHA3_FINISH_ERROR |
0x07 - Error when SHA3 finish fails
|
| XSECURE_SHA3_INVALID_PARAM |
0x08 - Invalid Argument
|
| XSECURE_SSS_INVALID_PARAM |
0x09 - Invalid Argument
|
| XSECURE_SHA3_STATE_MISMATCH_ERROR |
0x0A - State mismatch
|
| XSECURE_AES_GCM_TAG_MISMATCH |
0x40 - user provided GCM tag does not match calculated tag
|
| XSECURE_AES_KEY_CLEAR_ERROR |
0x41 - AES key clear error
|
| XSECURE_AES_DPA_CM_NOT_SUPPORTED |
0x42 - AES DPA CM is not supported on device
|
| XSECURE_AES_KAT_WRITE_KEY_FAILED_ERROR |
0x43 - Error when AES key write fails.
|
| XSECURE_AES_KAT_DECRYPT_INIT_FAILED_ERROR |
0x44 - Error when AES decrypt init fails.
|
| XSECURE_AES_KAT_GCM_TAG_MISMATCH_ERROR |
0x45 - Error when GCM tag not matched with user provided tag
|
| XSECURE_AES_KAT_DATA_MISMATCH_ERROR |
0x46 - Error when AES data not matched with expected data
|
| XSECURE_AES_KAT_FAILED_ERROR |
0x47 - AES KAT fails
|
| XSECURE_AESDPACM_KAT_WRITE_KEY_FAILED_ERROR |
0x48 - Error when AESDPACM key write fails.
|
| XSECURE_AESDPACM_KAT_KEYLOAD_FAILED_ERROR |
0x49 - Error when AESDPACM key load fails.
|
| XSECURE_AESDPACM_SSS_CFG_FAILED_ERROR |
0x4A - Error when AESDPACM sss config fails
|
| XSECURE_AESDPACM_KAT_FAILED_ERROR |
0x4B - AESDPACM KAT fails
|
| XSECURE_AESDPACM_KAT_CHECK1_FAILED_ERROR |
0x4C - Error when AESDPACM data not matched with expected data
|
| XSECURE_AESDPACM_KAT_CHECK2_FAILED_ERROR |
0x4D - Error when AESDPACM data not matched with expected data
|
| XSECURE_AESDPACM_KAT_CHECK3_FAILED_ERROR |
0x4E - Error when AESDPACM data not matched with expected data
|
| XSECURE_AESDPACM_KAT_CHECK4_FAILED_ERROR |
0x4F - Error when AESDPACM data not matched with expected data
|
| XSECURE_AESDPACM_KAT_CHECK5_FAILED_ERROR |
0x50 - Error when AESDPACM data not matched with expected data
|
| XSECURE_AES_INVALID_PARAM |
0x51 - Invalid Argument
|
| XSECURE_AESKAT_INVALID_PARAM |
0x52 - Invalid Argument
|
| XSECURE_AES_STATE_MISMATCH_ERROR |
0x53 - State mismatch
|
| XSECURE_AES_DEVICE_KEY_NOT_ALLOWED |
0x54 - Access to device keys is not allowed for IPI for any operations
|
| XSECURE_AES_KAT_DECRYPT_UPDATE_FAILED_ERROR |
0x55 - Error when AES KAT decrypt update fails
|
| XSECURE_AES_KAT_UPDATE_AAD_FAILED_ERROR |
0x56 - Error when aad update fails
|
| XSECURE_AES_KAT_ENCRYPT_INIT_FAILED_ERROR |
0x57 - Error when encrypt init fails
|
| XSECURE_AES_KAT_ENCRYPT_UPDATE_FAILED_ERROR |
0x58 - Error when encrypt update fails
|
| XSECURE_AES_KAT_ENCRYPT_FINAL_FAILED_ERROR |
0x59 - Error when encrypt final fails
|
| XSECURE_KAT_GCM_TAG_MISMATCH_ERROR |
0x5A - Error when GCM mismatch occurs
|
| XSECURE_AES_ZERO_PUF_KEY_NOT_ALLOWED |
0x5B - Error when PUF Key is selected as key source and PUF key is zeroized
|
| XSECURE_AES_UNALIGNED_SIZE_ERROR |
0x5C - Error when data is unaligned
|
| XSECURE_AES_INVALID_MODE |
0x5D - Error when invalid mode is used for AES operation
|
| XSECURE_INVALID_RESOURCE |
0X5F - Error when resource is other than SHA/AES
|
| XSECURE_RSA_KAT_INIT_ERROR |
0x80 - RSA KAT initialization failure
|
| XSECURE_RSA_KAT_ENCRYPT_FAILED_ERROR |
0x81 - RSA KAT fails
|
| XSECURE_RSA_KAT_ENCRYPT_DATA_MISMATCH_ERROR |
0x82 - Error when RSA data not matched with expected data
|
| XSECURE_RSA_INVALID_PARAM_RESERVED |
0x83 - Invalid Argument
|
| XSECURE_RSAKAT_INVALID_PARAM |
0x84 - Invalid Argument
|
| XSECURE_RSA_STATE_MISMATCH_RESERVED |
0x85 - State mismatch
|
| XSECURE_RSA_KAT_DECRYPT_FAILED_ERROR |
0x86 - RSA decrypt failed error
|
| XSECURE_RSA_KAT_DECRYPT_DATA_MISMATCH_ERROR |
0x87 - RSA when decrypted data doesn't match with plain text
|
| XSECURE_ELLIPTIC_KAT_KEY_NOTVALID_ERROR |
The error codes from 0x90 to 0xBF are reserved for Versal net platform This range is reserved please don't define any error codes for Versal.
0xC0 -ECC key is not valid
|
| XSECURE_ELLIPTIC_KAT_FAILED_ERROR |
0xC1 - Elliptic KAT fails
|
| XSECURE_ELLIPTIC_NON_SUPPORTED_CRV |
0xC2 - Elliptic Curve not supported
|
| XSECURE_ELLIPTIC_KEY_ZERO |
0xC3 - Public key is zero
|
| XSECURE_ELLIPTIC_KEY_WRONG_ORDER |
0xC4 - Wrong order of Public key
|
| XSECURE_ELLIPTIC_KEY_NOT_ON_CRV |
0xC5 - Key not found on curve
|
| XSECURE_ELLIPTIC_BAD_SIGN |
0xC6 - Signature provided for verification is bad
|
| XSECURE_ELLIPTIC_GEN_SIGN_INCORRECT_HASH_LEN |
0xC7 - Incorrect hash length for sign generation
|
| XSECURE_ELLIPTIC_VER_SIGN_INCORRECT_HASH_LEN |
0xC8 - Incorrect hash length for sign verification
|
| XSECURE_ELLIPTIC_GEN_SIGN_BAD_RAND_NUM |
0xC9 - Bad random number used for sign generation
|
| XSECURE_ELLIPTIC_GEN_KEY_ERR |
0xCA - Error in generating Public key
|
| XSECURE_ELLIPTIC_INVALID_PARAM |
0xCB - Invalid argument
|
| XSECURE_ELLIPTIC_VER_SIGN_R_ZERO |
0xCC - R set to zero
|
| XSECURE_ELLIPTIC_VER_SIGN_S_ZERO |
0xCD - S set to zero
|
| XSECURE_ELLIPTIC_VER_SIGN_R_ORDER_ERROR |
0xCE - R is not within ECC order
|
| XSECURE_ELLIPTIC_VER_SIGN_S_ORDER_ERROR |
0xCF - S is not within ECC order
|
| XSECURE_ELLIPTIC_KAT_INVLD_CRV_ERROR |
0xD0 - Curve not supported for KAT
|
| XSECURE_ELLIPTIC_KAT_SIGN_VERIFY_ERROR |
0xD1 - Signature verify error for KAT
|
| XSECURE_ELLIPTIC_KAT_GENERATE_SIGN_ERROR |
0xD2 - Generate Signature error for KAT
|
| XSECURE_ELLIPTIC_KAT_GENERATE_SIGNR_ERROR |
0xD3 - Generate Signature R error for KAT
|
| XSECURE_ELLIPTIC_KAT_GENERATE_SIGN_64BIT_ERROR |
0xD4 - Generate Signature error for KAT
|
| XSECURE_ELLIPTIC_KAT_64BIT_SIGN_VERIFY_ERROR |
0xD5 - Signature verify error for KAT
|
| XSECURE_ERR_CODE_RESERVED |
0xF0 - Till 2022.1 - No tamper response when tamper interrupt is detected From 2022.2 - Reserved
|
| XSECURE_IPI_ACCESS_NOT_ALLOWED |
0xF1 - Access to Xilsecure IPIs is disabled if IPI request is non secure
|
| XSECURE_SHA3_KAT_BUSY |
0xF2 - SHA3 busy with earlier operation, Kat can't be executed
|
| XSECURE_AES_KAT_BUSY |
0xF3 - AES busy with earlier operation, Kat can't be executed
|
| XSECURE_ERR_CRYPTO_ACCELERATOR_DISABLED |
0xF4 - Crypto Accelerators are disabled
|
| XSECURE_ERR_KAT_NOT_EXECUTED |
0xF5 - Error when KAT is not executed when crypto kat efuse bit is enabled
|
| XSECURE_SHA_INIT_ERROR |
0x02 - Error when SHA init fails.
|
| XSECURE_SHA_LAST_UPDATE_ERROR |
0x03 - Error when SHA last update fails.
|
| XSECURE_SHA_PMC_DMA_UPDATE_ERROR |
0x04 - Error when DMA driver fails to update the data to SHA
|
| XSECURE_SHA_TIMEOUT_ERROR |
0x05 - Error when timeout
|
| XSECURE_SHA_KAT_FAILED_ERROR |
0x06 - Error when SHA hash not matched with expected hash
|
| XSECURE_SHA_FINISH_ERROR |
0x07 - Error when SHA finish fails
|
| XSECURE_SHA_INVALID_PARAM |
0x08 - Invalid Argument
|
| XSECURE_SSS_INVALID_PARAM |
0x09 - Invalid Argument
|
| XSECURE_SHA_STATE_MISMATCH_ERROR |
0x0A - State mismatch
|
| XSECURE_SHA384_INVALID_PARAM |
0x0B - Invalid Param for SHA384 digest calculation
|
| XSECURE_SHA384_KAT_ERROR |
0x0C - Error when SHA384 KAT fails
|
| XSECURE_AES_GCM_TAG_MISMATCH |
0x40 - user provided GCM tag does not match calculated tag
|
| XSECURE_AES_KEY_CLEAR_ERROR |
0x41 - AES key clear error
|
| XSECURE_AES_DPA_CM_NOT_SUPPORTED |
0x42 - AES DPA CM is not supported on device
|
| XSECURE_AES_KAT_WRITE_KEY_FAILED_ERROR |
0x43 - Error when AES key write fails.
|
| XSECURE_AES_KAT_DECRYPT_INIT_FAILED_ERROR |
0x44 - Error when AES decrypt init fails.
|
| XSECURE_AES_KAT_GCM_TAG_MISMATCH_ERROR |
0x45 - Error when GCM tag not matched with user provided tag
|
| XSECURE_AES_KAT_DATA_MISMATCH_ERROR |
0x46 - Error when AES data not matched with expected data
|
| XSECURE_AES_KAT_FAILED_ERROR |
0x47 - AES KAT fails
|
| XSECURE_AESDPACM_KAT_WRITE_KEY_FAILED_ERROR |
0x48 - Error when AESDPACM key write fails.
|
| XSECURE_AESDPACM_KAT_KEYLOAD_FAILED_ERROR |
0x49 - Error when AESDPACM key load fails.
|
| XSECURE_AESDPACM_SSS_CFG_FAILED_ERROR |
0x4A - Error when AESDPACM sss config fails
|
| XSECURE_AESDPACM_KAT_FAILED_ERROR |
0x4B - AESDPACM KAT fails
|
| XSECURE_AESDPACM_KAT_CHECK1_FAILED_ERROR |
0x4C - Error when AESDPACM data not matched with expected data
|
| XSECURE_AESDPACM_KAT_CHECK2_FAILED_ERROR |
0x4D - Error when AESDPACM data not matched with expected data
|
| XSECURE_AESDPACM_KAT_CHECK3_FAILED_ERROR |
0x4E - Error when AESDPACM data not matched with expected data
|
| XSECURE_AESDPACM_KAT_CHECK4_FAILED_ERROR |
0x4F - Error when AESDPACM data not matched with expected data
|
| XSECURE_AESDPACM_KAT_CHECK5_FAILED_ERROR |
0x50 - Error when AESDPACM data not matched with expected data
|
| XSECURE_AES_INVALID_PARAM |
0x51 - Invalid Argument
|
| XSECURE_AESKAT_INVALID_PARAM |
0x52 - Invalid Argument
|
| XSECURE_AES_STATE_MISMATCH_ERROR |
0x53 - State mismatch
|
| XSECURE_AES_DEVICE_KEY_NOT_ALLOWED |
0x54 - Access to device keys is not allowed for IPI for any operations
|
| XSECURE_AES_KAT_DECRYPT_UPDATE_FAILED_ERROR |
0x55 - Error when AES KAT decrypt update fails
|
| XSECURE_AES_KAT_UPDATE_AAD_FAILED_ERROR |
0x56 - Error when aad update fails
|
| XSECURE_AES_KAT_ENCRYPT_INIT_FAILED_ERROR |
0x57 - Error when encrypt init fails
|
| XSECURE_AES_KAT_ENCRYPT_UPDATE_FAILED_ERROR |
0x58 - Error when encrypt update fails
|
| XSECURE_AES_KAT_ENCRYPT_FINAL_FAILED_ERROR |
0x59 - Error when encrypt final fails
|
| XSECURE_KAT_GCM_TAG_MISMATCH_ERROR |
0x5A - Error when GCM mismatch occurs
|
| XSECURE_AES_ZERO_PUF_KEY_NOT_ALLOWED |
0x5B - Error when PUF Key is selected as key source and PUF key is zeroized
|
| XSECURE_AES_UNALIGNED_SIZE_ERROR |
0x5C - Error when data is unaligned
|
| XSECURE_AES_INVALID_MODE |
0x5D - Error when invalid mode is used for AES operation
|
| XSECURE_INVALID_RESOURCE |
0X5F - Error when resource is other than SHA/AES
|
| XSECURE_RSA_OAEP_INVALID_PARAM |
0x70 - RSA OAEP Invalid param
|
| XSECURE_RSA_OAEP_INVALID_MSG_LEN |
0x71 - RSA OAEP Invalid Msg length
|
| XSECURE_RSA_OAEP_DB_MISMATCH_ERROR |
0x72 - RSA OAEP DB mismatch error
|
| XSECURE_RSA_OAEP_DATA_CPY_ERROR |
0x73 - RSA OAEP data copy failed
|
| XSECURE_RSA_OAEP_DATA_CMP_ERROR |
0x74 - RSA OAEP data compare failed
|
| XSECURE_RSA_OAEP_BYTE_MISMATCH_ERROR |
0x75 - RSA OAEP data byte mismatch error
|
| XSECURE_RSA_PWCT_MEM_CMP_FAILED_ERROR |
0x76 - RSA PWCT failed
|
| XSECURE_RSA_KAT_INIT_ERROR |
0x80 - RSA KAT initialization failure
|
| XSECURE_RSA_KAT_ENCRYPT_FAILED_ERROR |
0x81 - RSA KAT fails
|
| XSECURE_RSA_KAT_ENCRYPT_DATA_MISMATCH_ERROR |
0x82 - Error when RSA data not matched with expected data
|
| XSECURE_RSA_INVALID_PARAM_RESERVED |
0x83 - Invalid Argument
|
| XSECURE_RSAKAT_INVALID_PARAM |
0x84 - Invalid Argument
|
| XSECURE_RSA_STATE_MISMATCH_RESERVED |
0x85 - State mismatch
|
| XSECURE_RSA_KAT_DECRYPT_FAILED_ERROR |
0x86 - RSA decrypt failed error
|
| XSECURE_RSA_KAT_DECRYPT_DATA_MISMATCH_ERROR |
0x87 - RSA when decrypted data doesn't match with plain text
|
| XSECURE_RSA_KAT_PSS_SIGN_VER_ERROR |
0x88 - RSA pss sign verification failed
|
| XSECURE_RSA_EXPONENT_INVALID_PARAM |
0x89 - RSA Exponent invalid parameter
|
| XSECURE_HMAC_KAT_INIT_ERROR |
0x90 - HMAC init failure
|
| XSECURE_HMAC_KAT_UPDATE_ERROR |
0x91 - HMAC update failure
|
| XSECURE_HMAC_KAT_FINAL_ERROR |
0x92 - HMAC final failure
|
| XSECURE_HMAC_KAT_ERROR |
0x93 - HMAC KAT error
|
| XSECURE_HMAC_INVALID_PARAM |
0x94 - HMAC invalid parameter
|
| XSECURE_LMS_OTS_PUB_KEY_SIGN_TYPE_MISMATCH_ERROR |
0x8F - LMS invalid input param
|
| XSECURE_LMS_TYPE_UNSUPPORTED_ERROR |
0x90, LMS OTS Signature Verification - OTS Sign type mismatch with public key
|
| XSECURE_LMS_TYPE_LOOKUP_GLITCH_ERROR |
0x91, LMS Type not supported
|
| XSECURE_LMS_OTS_SIGN_SHA_DIGEST_FAILED_ERROR |
0x92, LMS parameter look up - glitch detected
|
| XSECURE_LMS_OTS_SIGN_UNSUPPORTED_TYPE_ERROR |
0x93, LMS OTS Signature Verification - hash chain per iteration sha digest failed
|
| XSECURE_AUTH_LMS_OTS_INVALID_SIGN_ADDR_ERROR |
0x94, LMS OTS Signature Verification - parameter lookup failed - not supported type
|
| XSECURE_AUTH_LMS_DIGEST_CHECKSUM_FAILED_ERROR |
0x95, LMS OTS Signature Verification - when signature to be used is at invalid address
|
| XSECURE_LMS_OTS_DIGEST_CHECKSUM_OP_FAILED_ERROR |
0x96, LMS OTS Signature Verification - checksum calculation failed during digest calculation
|
| XSECURE_LMS_SIGN_EXPECTED_PUB_KEY_ADDR_ERROR |
0x97, LMS OTS Signature Verification - Digest calculation operation failed
|
| XSECURE_LMS_SIGN_EXPECTED_PUB_KEY_LEN_1_ERROR |
0x98, LMS Signature Verification - invalid address for expected public key at Merkle tree root
|
| XSECURE_LMS_SIGN_EXPECTED_PUB_KEY_LEN_2_ERROR |
0x99, LMS Signature Verification - invalid len for expected public key at Merkle tree root - less than or equal to 4
|
| XSECURE_LMS_PUB_KEY_UNSUPPORTED_TYPE_1_ERROR |
0x9A, LMS Signature Verification - invalid len for expected public key at Merkle tree root - total less than required by parameters
|
| XSECURE_LMS_PUB_KEY_LMS_SIGN_TYPE_MISMATCH_ERROR |
0x9B, LMS Signature Verification - LMS public key parameter pick up failed - un supported type
|
| XSECURE_LMS_OTS_PUB_KEY_LMS_OTS_SIGN_TYPE_MISMATCH_ERROR |
0x9C, LMS Signature Verification - LMS type mismatch between LMS signature and public key
|
| XSECURE_LMS_SIGN_LEN_1_ERROR |
0x9D, LMS OTS type mismatch between LMS OTS signature and public key
|
| XSECURE_LMS_SIGN_LEN_2_ERROR |
0x9E, LMS Signature Verification - LMS signature length less than or equal 4 bytes
|
| XSECURE_LMS_SIGN_LEN_3_ERROR |
0x9F, LMS Signature Verification - LMS signature length less than required for LMS OTS signature
|
| XSECURE_LMS_SIGN_UNSUPPORTED_OTS_TYPE_1_ERROR |
0xA0, LMS Signature Verification - LMS signature length error - total len less than required by paramerters
|
| XSECURE_LMS_SIGN_UNSUPPORTED_TYPE_1_ERROR |
0xA1, LMS Signature Verification - LMS OTS parameters look up failed - unsupported type
|
| XSECURE_LMS_SIGN_INVALID_NODE_NUMBER_ERROR |
0xA2, LMS Signature Verification - LMS signature parameters lookup failed - un supported type
|
| XSECURE_LMS_SIGN_OTS_OP_ERROR |
0xA3, LMS Signature Verification - invalid node number 'q' in a Merkle tree
|
| XSECURE_LMS_PUB_KEY_AUTHENTICATION_FAILED_ERROR |
0xA4, LMS Signature Verification - LMS OTS signature verification failed
|
| XSECURE_LMS_PUB_KEY_AUTHENTICATION_GLITCH_ERROR |
0xA5, LMS Signature Verification - calculated LMS public key did not match with expected - authentication failed
|
| XSECURE_LMS_SIGN_VERIF_SHA_DIGEST_LEAF_FAILED_ERROR |
0xA6, LMS Signature Verification - LMS public key comparison glitch detected - authentication failed
|
| XSECURE_LMS_SIGN_VERIF_SHA_DIGEST_INTR_ODD_FAILED_ERROR |
0xA7, LMS Signature Verification - LMS signature to public key - leaf node sha digest failed
|
| XSECURE_LMS_SIGN_VERIF_SHA_DIGEST_INTR_EVEN_FAILED_ERROR |
0xA8, LMS Signature Verification - LMS signature to public key - odd internal node sha digest failed
|
| XSECURE_LMS_SIGN_VERIFY_BH_AND_TYPE_SHA_ALGO_MISMATCH_L0_ERROR |
0xA9, LMS Signature Verification - LMS sign to public key - even internal node sha digest failed
|
| XSECURE_LMS_SIGN_VERIFY_BH_AND_TYPE_SHA_ALGO_MISMATCH_L1_ERROR |
0xAA, LMS Signature Verification - SHA algorithm mismatch between one selected in Boot header and LMS & OTS - level 0
|
| XSECURE_LMS_HSS_PUB_KEY_INVALID_LEN_1_ERROR |
0xAB, LMS Signature Verification - SHA algorithm mismatch between one selected in Boot header and LMS & OTS - level 1
|
| XSECURE_LMS_HSS_PUB_KEY_INVALID_LEN_2_ERROR |
0xAC, LMS HSS Signature verification - HSS public key at an invalid address
|
| XSECURE_LMS_HSS_SIGN_LEVEL_UNSUPPORTED_ERROR |
0xAD, LMS HSS Signature verification - HSS pub key len less than required
|
| XSECURE_LMS_HSS_L0_PUB_KEY_LMS_TYPE_UNSUPPORTED_ERROR |
0xAE, LMS HSS Signature verification - only two levels of Merkle trees are supported
|
| XSECURE_LMS_HSS_L1_PUB_KEY_LMS_TYPE_1_UNSUPPORTED_ERROR |
0xAF, LMS HSS Signature verification - HSS pub key's LMS type parameter look up failed for level 0 tree
|
| XSECURE_LMS_HSS_L1_PUB_KEY_LMS_TYPE_2_UNSUPPORTED_ERROR |
0xB0, LMS HSS Signature verification - HSS pub key's LMS type parameter look up failed for level 1 tree - in HSS init
|
| XSECURE_LMS_HSS_L0_PUB_KEY_LMS_OTS_TYPE_UNSUPPORTED_ERROR |
0xB1, LMS HSS Signature verification - HSS pub key's LMS type parameter look up failed for level 1 tree - in HSS Finish
|
| XSECURE_LMS_HSS_L1_PUB_KEY_LMS_OTS_TYPE_UNSUPPORTED_ERROR |
0xB2, LMS HSS Signature verification - HSS pub key's LMS OTS type parameter look up failed for level 0 tree
|
| XSECURE_LMS_HSS_SIGN_INVALID_LEN_1_ERROR |
0xB3, LMS HSS Signature verification - HSS pub key's LMS OTS type parameter look up failed for level 1 tree
|
| XSECURE_LMS_HSS_L0_SIGN_INVALID_LEN_2_ERROR |
0xB4, LMS HSS Signature verification - HSS pub key's LMS OTS type parameter look up for level 1 tree - temporal glitch detected
|
| XSECURE_LMS_HSS_L1_SIGN_INVALID_LEN_2_ERROR |
0xB5, LMS HSS Signature verification - HSS signature len does not fit OTS signature for level 0
|
| XSECURE_LMS_HSS_SIGN_PUB_KEY_LEVEL_MISMATCH_ERROR |
0xB6, LMS HSS Signature verification - HSS signature len does not fit OTS signature for level 1
|
| XSECURE_LMS_HSS_L0_PUB_KEY_AUTH_FAILED_ERROR |
0xB7, LMS HSS Signature verification - HSS pub key & Signature levels mismatch
|
| XSECURE_LMS_HSS_L1_PUB_KEY_AUTH_FAILED_ERROR |
0xB8, LMS HSS Signature verification - Level 0 LMS auth op failed
|
| XSECURE_LMS_HSS_OTS_SIGN_INVALID_LEN_1_ERROR |
0xB9, LMS HSS Signature verification - Level 1 LMS auth op failed
|
| XSECURE_LMS_PUB_OP_FAILED_ERROR |
0xBA, LMS HSS Signature verification - OTS sign at level 1 is less than 4 bytes
|
| XSECURE_LMS_PUB_OP_FAILED_1_ERROR |
0xBB, LMS HSS Signature verification - authenticated public key for level 1 tree copy failed
|
| XSECURE_LMS_OTS_CHECKSUM_BUFF_INVALID_LEN_ERROR |
0xBC, LMS HSS Signature verification - authenticated public key for level 1 tree copy failed - iteration mismatch
|
| XSECURE_LMS_OTS_TYPE_UNSUPPORTED_ERROR |
0xBD, LMS OTS Checksum - buffer for digest is of invalid length (0)
|
| XSECURE_LMS_OTS_TYPE_LOOKUP_GLITCH_ERROR |
0xBE, LMS OTS type not supported
|
| XSECURE_ELLIPTIC_KAT_KEY_NOTVALID_ERROR |
0xBF, LMS OTS parameter look up - glitch detected
0xC0 -ECC key is not valid
|
| XSECURE_ELLIPTIC_KAT_FAILED_ERROR |
0xC1 - Elliptic KAT fails
|
| XSECURE_ELLIPTIC_NON_SUPPORTED_CRV |
0xC2 - Elliptic Curve not supported
|
| XSECURE_ELLIPTIC_KEY_ZERO |
0xC3 - Public key is zero
|
| XSECURE_ELLIPTIC_KEY_WRONG_ORDER |
0xC4 - Wrong order of Public key
|
| XSECURE_ELLIPTIC_KEY_NOT_ON_CRV |
0xC5 - Key not found on curve
|
| XSECURE_ELLIPTIC_BAD_SIGN |
0xC6 - Signature provided for verification is bad
|
| XSECURE_ELLIPTIC_GEN_SIGN_INCORRECT_HASH_LEN |
0xC7 - Incorrect hash length for sign generation
|
| XSECURE_ELLIPTIC_VER_SIGN_INCORRECT_HASH_LEN |
0xC8 - Incorrect hash length for sign verification
|
| XSECURE_ELLIPTIC_GEN_SIGN_BAD_RAND_NUM |
0xC9 - Bad random number used for sign generation
|
| XSECURE_ELLIPTIC_GEN_KEY_ERR |
0xCA - Error in generating Public key
|
| XSECURE_ELLIPTIC_INVALID_PARAM |
0xCB - Invalid argument
|
| XSECURE_ELLIPTIC_VER_SIGN_R_ZERO |
0xCC - R set to zero
|
| XSECURE_ELLIPTIC_VER_SIGN_S_ZERO |
0xCD - S set to zero
|
| XSECURE_ELLIPTIC_VER_SIGN_R_ORDER_ERROR |
0xCE - R is not within ECC order
|
| XSECURE_ELLIPTIC_VER_SIGN_S_ORDER_ERROR |
0xCF - S is not within ECC order
|
| XSECURE_ELLIPTIC_KAT_INVLD_CRV_ERROR |
0xD0 - Curve not supported for KAT
|
| XSECURE_ELLIPTIC_KAT_SIGN_VERIFY_ERROR |
0xD1 - Signature verify error for KAT
|
| XSECURE_ELLIPTIC_KAT_GENERATE_SIGN_ERROR |
0xD2 - Generate Signature error for KAT
|
| XSECURE_ELLIPTIC_KAT_GENERATE_SIGNR_ERROR |
0xD3 - Generate Signature R error for KAT
|
| XSECURE_ELLIPTIC_KAT_GENERATE_SIGN_64BIT_ERROR |
0xD4 - Generate Signature error for KAT
|
| XSECURE_ELLIPTIC_KAT_64BIT_SIGN_VERIFY_ERROR |
0xD5 - Signature verify error for KAT
|
| XSECURE_ECC_PRVT_KEY_GEN_ERR |
0xD6 - ECC private key generation error
|
| XSECURE_HSS_SHA2_256_KAT_ERROR |
0xD7 - LMS SHA2-256 KAT error
|
| XSECURE_HSS_SHAKE_256_KAT_ERROR |
0xD8 - LMS SHAKE KAT error
|
| XSECURE_ERR_KEY_STORE_SIZE |
0xE0 - Key store size error
|
| XSECURE_ERR_NO_FREE_KEY_SLOT |
0xE1 - No free key slot available to store the key
|
| XSECURE_ERR_KEY_WRAP_SIZE_MISMATCH |
0xE2 - Key size mismatch between wrap and unwrap
|
| XSECURE_ERR_AES_KEY_SIZE_NOT_SUPPORTED |
0xE3 - AES key size is not supported
|
| XSECURE_ERR_CODE_RESERVED |
0xF0 - Till 2022.1 - No tamper response when tamper interrupt is detected From 2022.2 - Reserved
|
| XSECURE_IPI_ACCESS_NOT_ALLOWED |
0xF1 - Access to Xilsecure IPIs is disabled if IPI request is non secure
|
| XSECURE_SHA3_KAT_BUSY |
0xF2 - SHA3 busy with earlier operation, Kat can't be executed
|
| XSECURE_AES_KAT_BUSY |
0xF3 - AES busy with earlier operation, Kat can't be executed
|
| XSECURE_ERR_CRYPTO_ACCELERATOR_DISABLED |
0xF4 - Crypto Accelerators are disabled
|
| XSECURE_ERR_KAT_NOT_EXECUTED |
0xF5 - Error when KAT is not executed when crypto kat efuse bit is enabled
|
| XSECURE_RSA_GEN_SIGN_FAILED_ERROR |
0xF6 - Error when RSA sign generation is failed
|
| XSECURE_ERR_ASU_KTE_DONE_NOT_SET |
0xF7 - Error in Key Transfer to ASU
|
| XSECURE_RSA_OP_MEM_CPY_FAILED_ERROR |
0xF8 - Error when MemCpy is failed after RSA operation
|
| XSECURE_RSA_OP_MEM_CPY_AND_CHANGE_ENDIANNESS_FAILED_ERROR |
0xF9 - Error during MemCpy and reversing the endianness
|
| XSECURE_RSA_OP_MEM_SET_ERROR |
0xF9 - Error when MemSet is failed during RSA private operation
|
| XSECURE_RSA_OP_REVERSE_ENDIANESS_ERROR |
0xFA - Error when reversing the endianness during RSA private operation
|
| XSECURE_ERR_GLITCH_DETECTED |
0xFB - Error glitch detected
|
| XSECURE_ERR_IN_TRNG_SELF_TESTS |
0xFC - Error in TRNG operation self tests
|
| XSECURE_ERR_TRNG_INIT_N_CONFIG |
0xFD - Error in TRNG Instantiate and configuration
|
| XSECURE_SHA3_INIT_ERROR |
0x02 - Error when SHA3 init fails.
|
| XSECURE_SHA3_LAST_UPDATE_ERROR |
0x03 - Error when SHA3 last update fails.
|
| XSECURE_SHA3_PMC_DMA_UPDATE_ERROR |
0x04 - Error when DMA driver fails to update the data to SHA3
|
| XSECURE_SHA3_TIMEOUT_ERROR |
0x05 - Error when timeout
|
| XSECURE_SHA3_KAT_FAILED_ERROR |
0x06 - Error when SHA3 hash not matched with expected hash
|
| XSECURE_SHA3_FINISH_ERROR |
0x07 - Error when SHA3 finish fails
|
| XSECURE_SHA3_INVALID_PARAM |
0x08 - Invalid Argument
|
| XSECURE_SSS_INVALID_PARAM |
0x09 - Invalid Argument
|
| XSECURE_SHA3_STATE_MISMATCH_ERROR |
0x0A - State mismatch
|
| XSECURE_SHA384_INVALID_PARAM |
0x0B - Invalid Param for SHA384 digest calculation
|
| XSECURE_SHA384_KAT_ERROR |
0x0C - Error when SHA384 KAT fails
|
| XSECURE_AES_GCM_TAG_MISMATCH |
0x40 - user provided GCM tag does not match calculated tag
|
| XSECURE_AES_KEY_CLEAR_ERROR |
0x41 - AES key clear error
|
| XSECURE_AES_DPA_CM_NOT_SUPPORTED |
0x42 - AES DPA CM is not supported on device
|
| XSECURE_AES_KAT_WRITE_KEY_FAILED_ERROR |
0x43 - Error when AES key write fails.
|
| XSECURE_AES_KAT_DECRYPT_INIT_FAILED_ERROR |
0x44 - Error when AES decrypt init fails.
|
| XSECURE_AES_KAT_GCM_TAG_MISMATCH_ERROR |
0x45 - Error when GCM tag not matched with user provided tag
|
| XSECURE_AES_KAT_DATA_MISMATCH_ERROR |
0x46 - Error when AES data not matched with expected data
|
| XSECURE_AES_KAT_FAILED_ERROR |
0x47 - AES KAT fails
|
| XSECURE_AESDPACM_KAT_WRITE_KEY_FAILED_ERROR |
0x48 - Error when AESDPACM key write fails.
|
| XSECURE_AESDPACM_KAT_KEYLOAD_FAILED_ERROR |
0x49 - Error when AESDPACM key load fails.
|
| XSECURE_AESDPACM_SSS_CFG_FAILED_ERROR |
0x4A - Error when AESDPACM sss config fails
|
| XSECURE_AESDPACM_KAT_FAILED_ERROR |
0x4B - AESDPACM KAT fails
|
| XSECURE_AESDPACM_KAT_CHECK1_FAILED_ERROR |
0x4C - Error when AESDPACM data not matched with expected data
|
| XSECURE_AESDPACM_KAT_CHECK2_FAILED_ERROR |
0x4D - Error when AESDPACM data not matched with expected data
|
| XSECURE_AESDPACM_KAT_CHECK3_FAILED_ERROR |
0x4E - Error when AESDPACM data not matched with expected data
|
| XSECURE_AESDPACM_KAT_CHECK4_FAILED_ERROR |
0x4F - Error when AESDPACM data not matched with expected data
|
| XSECURE_AESDPACM_KAT_CHECK5_FAILED_ERROR |
0x50 - Error when AESDPACM data not matched with expected data
|
| XSECURE_AES_INVALID_PARAM |
0x51 - Invalid Argument
|
| XSECURE_AESKAT_INVALID_PARAM |
0x52 - Invalid Argument
|
| XSECURE_AES_STATE_MISMATCH_ERROR |
0x53 - State mismatch
|
| XSECURE_AES_DEVICE_KEY_NOT_ALLOWED |
0x54 - Access to device keys is not allowed for IPI for any operations
|
| XSECURE_AES_KAT_DECRYPT_UPDATE_FAILED_ERROR |
0x55 - Error when AES KAT decrypt update fails
|
| XSECURE_AES_KAT_UPDATE_AAD_FAILED_ERROR |
0x56 - Error when aad update fails
|
| XSECURE_AES_KAT_ENCRYPT_INIT_FAILED_ERROR |
0x57 - Error when encrypt init fails
|
| XSECURE_AES_KAT_ENCRYPT_UPDATE_FAILED_ERROR |
0x58 - Error when encrypt update fails
|
| XSECURE_AES_KAT_ENCRYPT_FINAL_FAILED_ERROR |
0x59 - Error when encrypt final fails
|
| XSECURE_KAT_GCM_TAG_MISMATCH_ERROR |
0x5A - Error when GCM mismatch occurs
|
| XSECURE_AES_ZERO_PUF_KEY_NOT_ALLOWED |
0x5B - Error when PUF Key is selected as key source and PUF key is zeroized
|
| XSECURE_AES_UNALIGNED_SIZE_ERROR |
0x5C - Error when data is unaligned
|
| XSECURE_AES_INVALID_MODE |
0x5D - Error when invalid mode is used for AES operation
|
| XSECURE_INVALID_RESOURCE |
0X5F - Error when resource is other than SHA/AES
|
| XSECURE_RSA_OAEP_INVALID_PARAM |
0x70 - RSA OAEP Invalid param
|
| XSECURE_RSA_OAEP_INVALID_MSG_LEN |
0x71 - RSA OAEP Invalid Msg length
|
| XSECURE_RSA_OAEP_DB_MISMATCH_ERROR |
0x72 - RSA OAEP DB mismatch error
|
| XSECURE_RSA_OAEP_DATA_CPY_ERROR |
0x73 - RSA OAEP data copy failed
|
| XSECURE_RSA_OAEP_DATA_CMP_ERROR |
0x74 - RSA OAEP data compare failed
|
| XSECURE_RSA_OAEP_BYTE_MISMATCH_ERROR |
0x75 - RSA OAEP data byte mismatch error
|
| XSECURE_RSA_PWCT_MEM_CMP_FAILED_ERROR |
0x76 - RSA PWCT failed
|
| XSECURE_RSA_KAT_INIT_ERROR |
0x80 - RSA KAT initialization failure
|
| XSECURE_RSA_KAT_ENCRYPT_FAILED_ERROR |
0x81 - RSA KAT fails
|
| XSECURE_RSA_KAT_ENCRYPT_DATA_MISMATCH_ERROR |
0x82 - Error when RSA data not matched with expected data
|
| XSECURE_RSA_INVALID_PARAM_RESERVED |
0x83 - Invalid Argument
|
| XSECURE_RSAKAT_INVALID_PARAM |
0x84 - Invalid Argument
|
| XSECURE_RSA_STATE_MISMATCH_RESERVED |
0x85 - State mismatch
|
| XSECURE_RSA_KAT_DECRYPT_FAILED_ERROR |
0x86 - RSA decrypt failed error
|
| XSECURE_RSA_KAT_DECRYPT_DATA_MISMATCH_ERROR |
0x87 - RSA when decrypted data doesn't match with plain text
|
| XSECURE_RSA_KAT_PSS_SIGN_VER_ERROR |
0x88 - RSA pss sign verification failed
|
| XSECURE_RSA_EXPONENT_INVALID_PARAM |
0x89 - RSA Exponent invalid parameter
|
| XSECURE_HMAC_KAT_INIT_ERROR |
0x90 - HMAC init failure
|
| XSECURE_HMAC_KAT_UPDATE_ERROR |
0x91 - HMAC update failure
|
| XSECURE_HMAC_KAT_FINAL_ERROR |
0x92 - HMAC final failure
|
| XSECURE_HMAC_KAT_ERROR |
0x93 - HMAC KAT error
|
| XSECURE_HMAC_INVALID_PARAM |
0x94 - HMAC invalid parameter
|
| XSECURE_ECC_PRVT_KEY_GEN_ERR |
= 0xBF - ECC private key generation error
|
| XSECURE_ELLIPTIC_KAT_KEY_NOTVALID_ERROR |
0xC0 -ECC key is not valid
|
| XSECURE_ELLIPTIC_KAT_FAILED_ERROR |
0xC1 - Elliptic KAT fails
|
| XSECURE_ELLIPTIC_NON_SUPPORTED_CRV |
0xC2 - Elliptic Curve not supported
|
| XSECURE_ELLIPTIC_KEY_ZERO |
0xC3 - Public key is zero
|
| XSECURE_ELLIPTIC_KEY_WRONG_ORDER |
0xC4 - Wrong order of Public key
|
| XSECURE_ELLIPTIC_KEY_NOT_ON_CRV |
0xC5 - Key not found on curve
|
| XSECURE_ELLIPTIC_BAD_SIGN |
0xC6 - Signature provided for verification is bad
|
| XSECURE_ELLIPTIC_GEN_SIGN_INCORRECT_HASH_LEN |
0xC7 - Incorrect hash length for sign generation
|
| XSECURE_ELLIPTIC_VER_SIGN_INCORRECT_HASH_LEN |
0xC8 - Incorrect hash length for sign verification
|
| XSECURE_ELLIPTIC_GEN_SIGN_BAD_RAND_NUM |
0xC9 - Bad random number used for sign generation
|
| XSECURE_ELLIPTIC_GEN_KEY_ERR |
0xCA - Error in generating Public key
|
| XSECURE_ELLIPTIC_INVALID_PARAM |
0xCB - Invalid argument
|
| XSECURE_ELLIPTIC_VER_SIGN_R_ZERO |
0xCC - R set to zero
|
| XSECURE_ELLIPTIC_VER_SIGN_S_ZERO |
0xCD - S set to zero
|
| XSECURE_ELLIPTIC_VER_SIGN_R_ORDER_ERROR |
0xCE - R is not within ECC order
|
| XSECURE_ELLIPTIC_VER_SIGN_S_ORDER_ERROR |
0xCF - S is not within ECC order
|
| XSECURE_ELLIPTIC_KAT_INVLD_CRV_ERROR |
0xD0 - Curve not supported for KAT
|
| XSECURE_ELLIPTIC_KAT_SIGN_VERIFY_ERROR |
0xD1 - Signature verify error for KAT
|
| XSECURE_ELLIPTIC_KAT_GENERATE_SIGN_ERROR |
0xD2 - Generate Signature error for KAT
|
| XSECURE_ELLIPTIC_KAT_GENERATE_SIGNR_ERROR |
0xD3 - Generate Signature R error for KAT
|
| XSECURE_ELLIPTIC_KAT_GENERATE_SIGN_64BIT_ERROR |
0xD4 - Generate Signature error for KAT
|
| XSECURE_ELLIPTIC_KAT_64BIT_SIGN_VERIFY_ERROR |
0xD5 - Signature verify error for KAT
|
| XSECURE_ERR_KEY_STORE_SIZE |
0xE0 - Key store size error
|
| XSECURE_ERR_NO_FREE_KEY_SLOT |
0xE1 - No free key slot available to store the key
|
| XSECURE_ERR_KEY_WRAP_SIZE_MISMATCH |
0xE2 - Key size mismatch between wrap and unwrap
|
| XSECURE_ERR_AES_KEY_SIZE_NOT_SUPPORTED |
0xE3 - AES key size is not supported
|
| XSECURE_ERR_AES_KEY_UNWRAP_FAILED_ERROR |
0xE4 - Error when AES key unwrap is failed
|
| XSECURE_ERR_INVALID_KEY_STORE_ADDR |
0xE5 - Error when key store address is not provided
|
| XSECURE_ERR_CODE_RESERVED |
0xF0 - Till 2022.1 - No tamper response when tamper interrupt is detected From 2022.2 - Reserved
|
| XSECURE_IPI_ACCESS_NOT_ALLOWED |
0xF1 - Access to Xilsecure IPIs is disabled if IPI request is non secure
|
| XSECURE_SHA3_KAT_BUSY |
0xF2 - SHA3 busy with earlier operation, Kat can't be executed
|
| XSECURE_AES_KAT_BUSY |
0xF3 - AES busy with earlier operation, Kat can't be executed
|
| XSECURE_ERR_CRYPTO_ACCELERATOR_DISABLED |
0xF4 - Crypto Accelerators are disabled
|
| XSECURE_ERR_KAT_NOT_EXECUTED |
0xF5 - Error when KAT is not executed when crypto kat efuse bit is enabled
|
| XSECURE_RSA_GEN_SIGN_FAILED_ERROR |
0xF6 - Error when RSA sign generation is failed
|
| XSECURE_RSA_OP_MEM_CPY_FAILED_ERROR |
0xF7 - Error when MemCpy is failed after RSA operation
|
