ComposeSTRTableFile

Composes a genome-wide STR location table used for DragSTR model auto-calibration

Category Reference

Overview

This tool looks for low-complexity STR sequences along the reference that are later used to estimate the Dragstr model during single sample auto calibration {@link CalibrateDragstrModel}.

Inputs

This command takes as input the reference (possibly a subset of intervals) and an optional {@link STRDecimationTable decimation table} (herein referred as DT).

The DT modulates how often we sample a site for each possible period and repeat length. Since there is far more positions with short period and short repeat length sampling for those combinations should be less frequent. For further details about the format of this table and interpretation of its values please check the documentation in class {@link STRDecimationTable}.

If no DT is provided, the tool uses a default one that has been tailored to work fine when run over the entire Human genome and it should be alright with other genomes of comparable size (i.e. 1 to 10Gbps). With larger genomes, that default DT will likely result in an unecessarely large number of sampled sites that it turn may increase the run time of tools that depend on the output. In contrast, with smaller genomes or subsets (using targeted intervals) it might result in a number of sampled sites too small to build accurate Dragstr model. In this case you really need to compose and provide your own DT or perhaps try out not to decimate at all ({@code --decimation NONE}).

Output

The output of this command is a zip file that contains the collection of sampled sites in binary form ({@code all.bin}), and index for that file for quick access by location interval ({@code all.idx}). Other files in the zip provide some summary and tracking information, for example the reference sequence dictionary ({@code reference.dict}), a copy of the DT ({@code decimation.txt}) and summarized stats ({@code summary.txt}).

Examples


     # Human? just use the default.
     gatk ComposeSTRTableFile -R hg19.fasta -O hg19.str.zip
     # or ...
     gatk ComposeSTRTableFile -R hg19.fasta --decimation DEFAULT -O hg19.str.zip


     # yeast genome is roughly ~ 12Mbp long.
     gatk ComposeSTRTableFile -R yeast.fasta --decimation custom-yeast.dt -O yeast.str.zip


     #  Carsonella ruddii just about 160Kbps, prorably we don't want to decimate at all:
     gatk ComposeSTRTableFile -R Cruddii.fasta --decimation NONE -O yeast.str.zip

Additional Information

Read filters

This Read Filter is automatically applied to the data by the Engine before processing by ComposeSTRTableFile.

WellformedReadFilter

ComposeSTRTableFile specific arguments

This table summarizes the command-line arguments that are specific to this tool. For more details on each argument, see the list further down below the table or click on an argument name to jump directly to that entry in the list.

Argument name(s)	Default value	Summary
Required Arguments
--output -O		name of the zip file where the sites sampled will be stored
--reference -R		Reference sequence file
Optional Tool Arguments
--arguments_file		read one or more arguments files and add them to the command line
--cloud-index-prefetch-buffer -CIPB	-1	Size of the cloud-only prefetch buffer (in MB; 0 to disable). Defaults to cloudPrefetchBuffer if unset.
--cloud-prefetch-buffer -CPB	40	Size of the cloud-only prefetch buffer (in MB; 0 to disable).
--decimation	DEFAULT	decimation per period and repeat. It can be "DEFAULT" to use the default values (DEFAULT), "NONE" to deactivate decimation (potentially resulting in a very large output file) or indicate the path to a file that contains the decimation matrix.
--disable-bam-index-caching -DBIC	false	If true, don't cache bam indexes, this will reduce memory requirements but may harm performance if many intervals are specified. Caching is automatically disabled if there are no intervals specified.
--disable-sequence-dictionary-validation	false	If specified, do not check the sequence dictionaries from our inputs for compatibility. Use at your own risk!
--gcs-max-retries -gcs-retries	20	If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection
--gcs-project-for-requester-pays		Project to bill when accessing "requester pays" buckets. If unset, these buckets cannot be accessed. User must have storage.buckets.get permission on the bucket being accessed.
--help -h	false	display the help message
--interval-merging-rule -imr	ALL	Interval merging rule for abutting intervals
--intervals -L		One or more genomic intervals over which to operate
--max-period	8	maximum STR period sampled
--max-repeats	20	maximum STR repeat sampled
--sites-only-vcf-output	false	If true, don't emit genotype fields when writing vcf file output.
--version	false	display the version number for this tool
Optional Common Arguments
--add-output-sam-program-record	true	If true, adds a PG tag to created SAM/BAM/CRAM files.
--add-output-vcf-command-line	true	If true, adds a command line header line to created VCF files.
--create-output-bam-index -OBI	true	If true, create a BAM/CRAM index when writing a coordinate-sorted BAM/CRAM file.
--create-output-bam-md5 -OBM	false	If true, create a MD5 digest for any BAM/SAM/CRAM file created
--create-output-variant-index -OVI	true	If true, create a VCF index when writing a coordinate-sorted VCF file.
--create-output-variant-md5 -OVM	false	If true, create a a MD5 digest any VCF file created.
--disable-read-filter -DF		Read filters to be disabled before analysis
--disable-tool-default-read-filters	false	Disable all tool default read filters (WARNING: many tools will not function correctly without their default read filters on)
--exclude-intervals -XL		One or more genomic intervals to exclude from processing
--gatk-config-file		A configuration file to use with the GATK.
--input -I		BAM/SAM/CRAM file containing reads
--interval-exclusion-padding -ixp	0	Amount of padding (in bp) to add to each interval you are excluding.
--interval-padding -ip	0	Amount of padding (in bp) to add to each interval you are including.
--interval-set-rule -isr	UNION	Set merging approach to use for combining interval inputs
--inverted-read-filter -XRF		Inverted (with flipped acceptance/failure conditions) read filters applied before analysis (after regular read filters).
--lenient -LE	false	Lenient processing of VCF files
--max-variants-per-shard	0	If non-zero, partitions VCF output into shards, each containing up to the given number of records.
--QUIET	false	Whether to suppress job-summary info on System.err.
--read-filter -RF		Read filters to be applied before analysis
--read-index		Indices to use for the read inputs. If specified, an index must be provided for every read input and in the same order as the read inputs. If this argument is not specified, the path to the index for each input will be inferred automatically.
--read-validation-stringency -VS	SILENT	Validation stringency for all SAM/BAM/CRAM/SRA files read by this program. The default stringency value SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded.
--seconds-between-progress-updates	10.0	Output traversal statistics every time this many seconds elapse
--sequence-dictionary		Use the given sequence dictionary as the master/canonical sequence dictionary. Must be a .dict file.
--tmp-dir		Temp directory to use.
--use-jdk-deflater -jdk-deflater	false	Whether to use the JdkDeflater (as opposed to IntelDeflater)
--use-jdk-inflater -jdk-inflater	false	Whether to use the JdkInflater (as opposed to IntelInflater)
--verbosity	INFO	Control verbosity of logging.
Advanced Arguments
--showHidden	false	display hidden arguments

Argument details

Arguments in this list are specific to this tool. Keep in mind that other arguments are available that are shared with other tools (e.g. command-line GATK arguments); see Inherited arguments above.

--add-output-sam-program-record / -add-output-sam-program-record

If true, adds a PG tag to created SAM/BAM/CRAM files.

boolean true

--add-output-vcf-command-line / -add-output-vcf-command-line

If true, adds a command line header line to created VCF files.

boolean true

--arguments_file

read one or more arguments files and add them to the command line

List[File] []

--cloud-index-prefetch-buffer / -CIPB

Size of the cloud-only prefetch buffer (in MB; 0 to disable). Defaults to cloudPrefetchBuffer if unset.

int -1 [ [ -∞ ∞ ] ]

--cloud-prefetch-buffer / -CPB

Size of the cloud-only prefetch buffer (in MB; 0 to disable).

int 40 [ [ -∞ ∞ ] ]

--create-output-bam-index / -OBI

If true, create a BAM/CRAM index when writing a coordinate-sorted BAM/CRAM file.

boolean true

--create-output-bam-md5 / -OBM

If true, create a MD5 digest for any BAM/SAM/CRAM file created

boolean false

--create-output-variant-index / -OVI

If true, create a VCF index when writing a coordinate-sorted VCF file.

boolean true

--create-output-variant-md5 / -OVM

If true, create a a MD5 digest any VCF file created.

boolean false

--decimation

decimation per period and repeat. It can be "DEFAULT" to use the default values (DEFAULT), "NONE" to deactivate decimation (potentially resulting in a very large output file) or indicate the path to a file that contains the decimation matrix.

STRDecimationTable DEFAULT

--disable-bam-index-caching / -DBIC

If true, don't cache bam indexes, this will reduce memory requirements but may harm performance if many intervals are specified. Caching is automatically disabled if there are no intervals specified.

boolean false

--disable-read-filter / -DF

Read filters to be disabled before analysis

List[String] []

--disable-sequence-dictionary-validation / -disable-sequence-dictionary-validation

If specified, do not check the sequence dictionaries from our inputs for compatibility. Use at your own risk!

boolean false

--disable-tool-default-read-filters / -disable-tool-default-read-filters

Disable all tool default read filters (WARNING: many tools will not function correctly without their default read filters on)

boolean false

--exclude-intervals / -XL

One or more genomic intervals to exclude from processing
Use this argument to exclude certain parts of the genome from the analysis (like -L, but the opposite). This argument can be specified multiple times. You can use samtools-style intervals either explicitly on the command line (e.g. -XL 1 or -XL 1:100-200) or by loading in a file containing a list of intervals (e.g. -XL myFile.intervals). strings gathered from the command line -XL argument to be parsed into intervals to exclude

List[String] []

--gatk-config-file

A configuration file to use with the GATK.

String null

--gcs-max-retries / -gcs-retries

If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection

int 20 [ [ -∞ ∞ ] ]

--gcs-project-for-requester-pays

Project to bill when accessing "requester pays" buckets. If unset, these buckets cannot be accessed. User must have storage.buckets.get permission on the bucket being accessed.

String ""

--help / -h

display the help message

boolean false

--input / -I

BAM/SAM/CRAM file containing reads

List[GATKPath] []

--interval-exclusion-padding / -ixp

Amount of padding (in bp) to add to each interval you are excluding.
Use this to add padding to the intervals specified using -XL. For example, '-XL 1:100' with a padding value of 20 would turn into '-XL 1:80-120'. This is typically used to add padding around targets when analyzing exomes.

int 0 [ [ -∞ ∞ ] ]

--interval-merging-rule / -imr

Interval merging rule for abutting intervals
By default, the program merges abutting intervals (i.e. intervals that are directly side-by-side but do not actually overlap) into a single continuous interval. However you can change this behavior if you want them to be treated as separate intervals instead.

The --interval-merging-rule argument is an enumerated type (IntervalMergingRule), which can have one of the following values:

ALL
OVERLAPPING_ONLY

IntervalMergingRule ALL

--interval-padding / -ip

Amount of padding (in bp) to add to each interval you are including.
Use this to add padding to the intervals specified using -L. For example, '-L 1:100' with a padding value of 20 would turn into '-L 1:80-120'. This is typically used to add padding around targets when analyzing exomes.

int 0 [ [ -∞ ∞ ] ]

--interval-set-rule / -isr

Set merging approach to use for combining interval inputs
By default, the program will take the UNION of all intervals specified using -L and/or -XL. However, you can change this setting for -L, for example if you want to take the INTERSECTION of the sets instead. E.g. to perform the analysis only on chromosome 1 exomes, you could specify -L exomes.intervals -L 1 --interval-set-rule INTERSECTION. However, it is not possible to modify the merging approach for intervals passed using -XL (they will always be merged using UNION). Note that if you specify both -L and -XL, the -XL interval set will be subtracted from the -L interval set.

The --interval-set-rule argument is an enumerated type (IntervalSetRule), which can have one of the following values:

UNION: Take the union of all intervals
INTERSECTION: Take the intersection of intervals (the subset that overlaps all intervals specified)

IntervalSetRule UNION

--intervals / -L

One or more genomic intervals over which to operate

List[String] []

--inverted-read-filter / -XRF

Inverted (with flipped acceptance/failure conditions) read filters applied before analysis (after regular read filters).

List[String] []

--lenient / -LE

Lenient processing of VCF files

boolean false

--max-period

maximum STR period sampled

int 8 [ [ 1 20 ] ]

--max-repeats

maximum STR repeat sampled

int 20 [ [ 1 100 ] ]

--max-variants-per-shard

If non-zero, partitions VCF output into shards, each containing up to the given number of records.

int 0 [ [ 0 ∞ ] ]

--output / -O

name of the zip file where the sites sampled will be stored

R GATKPath null

--QUIET

Whether to suppress job-summary info on System.err.

Boolean false

--read-filter / -RF

Read filters to be applied before analysis

List[String] []

--read-index / -read-index

Indices to use for the read inputs. If specified, an index must be provided for every read input and in the same order as the read inputs. If this argument is not specified, the path to the index for each input will be inferred automatically.

List[GATKPath] []

--read-validation-stringency / -VS

Validation stringency for all SAM/BAM/CRAM/SRA files read by this program. The default stringency value SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded.

The --read-validation-stringency argument is an enumerated type (ValidationStringency), which can have one of the following values: